Pearl Mill Pm-40

Product Description

PEARL MILL PM-10, PM-20 & PM-40

S.F. PEAR MILL Suitable For Grinding Low Medium High Viscosity Material Between 50 Cps And 5000 Cps Thixotropics And Products With Highly Pigmented System.

BODY:

This Machine Will Have The Following Items. Sturdy Mild Steel Heavy Duty Plate Frame Body Of 10mm Thick For The Mill.

GRINDING DISC:

Grinding Disc Will Be Of Polypropylene 25mm Thick Having PM-10 will have 4 Nos, PM-20 will have 6 Nos and PM-40 will have 10 Nos Of Disc For Grinding (Water Based). Or Range Of Grinding Disc Available Will Be Of Special Wear-Resistant Steel, Hardened Chrome Steel Discs, Stainless Steel (304 Or 316), Hastelloy C , Polyurethane , UHMW Polyethylene , Polyamide (Nylon).

MAIN SHAFT:

Main Drive Shaft Will Be Of Stainless Steel 304 Construction.

GRINDING CONTAINER:

Double Walled Cooling Efficiency Is Enhanced Through The Use Of A Two-Zone Jacket. Inner Grinding Cylinder Will Be Of Stainless Steel 304 10mm Thick  And 3mm Thick Water Cooling Jacket Of Stainless Steel 304. S.F. Pearl Mill Will Have 20/40/60/80/100 Liters Size Of Grinding Cylinder Material Of Construction Stainless Steel 304/316.To Control Temperature Use Of Chilled Water Is Required.

SEALING:

Shaft Sealing Is Carried Out By A Single-Action Mechanical Seal With Rotor And Stator Of Tungsten Carbide. Rinsing An Of The Mechanical Seal Is Provided By A Glycerine-Flow Closed Circuit System By A PTFE Lip-Seal, Glycerin Also Water Cooled.

SEPARATION FOR THE GRINDING BEADS:

SCREE TYPE Outlet Screen For Separation Of Grinding Media From Slurry, Grinding Beads Size .5 mm To 1.0 mm.

DRIVE:

10 HP for PM-10, 20 HP for PM-20 & 40 HP for PM-40 1440 RPM, 3ph, 440V, 50Hz Of Any Standard Make (CROMPTON,SIEMENS, KIRLOSAKAR) Etc. Feeding Pump Is Runned And Controlled By A 1.5kw 2HP Variable Speed Mechanical Drive Box Having The Speed Range Of 40 200 Rpm Or Diapharm Pump. Mechanical Seal Rinsing Pump Motor Is 0.18kw.

AGITATOR DISC PERIPHERAL SPEEDS:

The Speeds Are 10 M/Sec, Fixed Type B Or C Sec Motor Pulley.

FEEDING PUMP:

Screw Pump Of Size 1 Coupled With Variable Speed Gear Box  Or Diapharm Pump M Seal Rinsing Pump Inch / Centrifugal Type.

MATERIALS:

Material Parts Which Are Subject To Wear And Tear With The Product Are Made Of Specific Hardened Steel And Stainless Steel.

CONTROL PANEL:

Control Panel Mounted Separately On The Side Of  Machine Body Is Composed Of Fully Automatic Star Delta Starter For Main And D.O.L. For Feeding Pump, Start-Stop Buttons For Motors; ON_OFF Switch And Ammeter; Emergency Stop Button.

PRODUCTION CAPACITY

The Capacity Of PM-10, PM 20, PM 40 Completely Depends On The Product To Be Processed. It May Differ Between The Average V   960 Kg/S, But The Actual Values May Vary During The Operation.

Machine Limiting Values

Max. Product Pressure:                                                                  3 bar

Max Product Temperature:                                                             110 C

Min. Temp. Of Cooling Water:                                                       25C

Max. Pressure of Cooling Water:                                                  6 bar

Max. Cooling Water Pressure for Glycerine Vessel:                 4 bar